1 - Find the boat. Hello, boat!
Viewed: 591 times.
|
2 - Remove the cover
Viewed: 511 times.
|
3 - Insert the drainplug
Viewed: 524 times.
|
4 - Inspect the boat
Viewed: 523 times.
|
5 - Remove the two mast sections
Viewed: 534 times.
|
7 - Place the centerboard next to the boat
Viewed: 529 times.
|
8 - Assemble the tiller and rudder
Viewed: 530 times.
|
9 - Insert the rudder
Viewed: 560 times.
|
10 - Make sure the tiller is threaded through the traveler correctly, tighten traveler
Viewed: 813 times.
|
11 - Lay the mast sections on the dock (actually did this in step 5)
Viewed: 527 times.
|
12 - Assemble the mast sections, check for mast bend
Viewed: 514 times.
|
13 - Slide the sail onto the mast
Viewed: 541 times.
|
14 - Inspect the sail, make sure it is all the way on the mast, and straight
Viewed: 498 times.
|
15 - Get the battens out of the blade bag
Viewed: 517 times.
|
16 - Insert the battens into the sail
Viewed: 558 times.
|
17 - Finish inserting the battens all the way into each batten pocket
Viewed: 533 times.
|
18 - Step the mast. Make sure the mast is all the way into the hole
Viewed: 572 times.
|
19 - Check the lines around the mast
Viewed: 612 times.
|
21 - Install the vang using the quick release pin
Viewed: 638 times.
|
22 - Wrap the mast tiedown around the mast and tie a bowline
Viewed: 630 times.
|
